• Vehicles with pulsed DRL voltage such as the 2015+ WRX / STI platform, and most late model vehicles will need the H300 resistor in order to run these without flicker / pulsing issues. Please take note of this before placing your order.

Over the course of the last year, Morimoto was hard at work developing a new kind of LED bulb. It re-creates the original beam pattern from your optics effectively by doing more with less. They will put more light on the road for you as the driver, while creating less glare for oncoming traffic compared to any other LED bulb on the market today.

The advanced PCB technology at the core of the 2Stroke 3.0 sets a new industry benchmark emission surface interval of just 2mm total. The PCB core itself is just 1.0mm thick. The dielectric layer: 300um. The circuit pattern: 140um, and the Osram Oslon HKL351.TE LED chips: just .43mm each. Paired with the 1.03 x 4.33mm light-emitting surface area of the LEDs: this adds up to a total cubic volume of 4.46mm. At the end of the day, no LED bulb in the world more closely simulates the filament size of an incandescent bulb more accurately than the Morimoto 2Stroke 3.0–and for those in the know, this is critical when it comes to proper beam distribution.

The 2Stroke 3.0 LED bulbs feature a fully adjustable base. In order to fully utilize the optical facets in any reflector or projector: The light emitting diodes must face the 3-o-clock and 9-o-clock positions. Since no single standard exists across different headlight and fog light assemblies, all bulbs in the 2Stroke 3.0 range are fully adjustable. A geared step rotational adjuster mechanism is installed for all bulbs which twist-to-lock, offering adjustability in 15-degree intervals. An omni-adjustable rotation mechanism is utilized on all bulbs that are press-fit or clip into the housing.

Fitment: Please take note this kit is designed to work with vehicles that utilize a standard 9005 Bulb style, this product will NOT work for cars equipped with Factory HID or LED bulbs. We urge all customers to confirm their vehicles bulb fitment by checking their owners manual!

DRL USAGE:The LED Driver is configured to accept a wide range of input voltage, making them compatible with low-voltage daytime running lights commonly found on modern vehicles. When the LED driver detects 6-9V of input: The system logic automatically switches to produce just 30% of the standard output. The low power drive rate of 250mA produces only 460lm per emitter and enables the 2Stroke 3.0 to produce a suitably low output volume as a daytime running light. In this mode, the cooling fan also shuts off to conserve power/lifespan.For vehicles with a PWM-based DRL signal, an inline PWM module that produces a clean DC6V will be required.(Late model Subaru’s use a PWM-based DRL)The driver is completely potted, making it completely weather-proof. Note that the DRL-Drive function is only for use in non-US markets.”

Sold as asingle unit. You will need 2x for a pair.