The high pressure built-up from inside the wheel well cause aerodynamic lift which also creates turbulence drag. Relieving this high-pressure build-up by adding fender louver/vent extractors can reduce front axle lift, increasing traction and grip on the tires. It will also help cool the brake system, allowing hot air in the wheel well to escape by moving from positive pressure to negative pressure.

Air drag is the number one cause for low fuel efficiency. Wheel well high pressure built-up contributes up to 30% of aerodynamic drag of a vehicle. Redirecting air out of wheel well increases fuel economy through the reduction of drag.

Built using pre-preg. carbon fiber composite materials for superior strength-to-weight ratio.

Features:

• Carbon Fiber Construction
  This component is formed in the autoclave at high temperatures using pre-pregnated carbon fiber manufacturing processes, for high strength and low weight.
• UV Resistant Coating
  Each Air vent is finished with UV-resistant clear-coat paint for resistance against various environmental conditions (take care of this as you would take care of your vehicle’s paint finish – polish then coat with good-quality wax or synthetic protectant).

Benefits:

1. Relieve high air pressure built-up from inner wheel well.
2. Reduce lift and drag.
3. Improve brake cooling.
4. Increase traction and grip.
5. Increase fuel efficiency.