Air Intake System

Large Three Layer Performance Air Filter:

Momentums unique filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2 tall 360-degree radial flow air filter features a 4 flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This RED polyethylene media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.

Unique One-Piece Housing:

The one-piece sealed housing, constructed of heat-resistance red cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy and fast installation. A large, clear sight window allows for a hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet can be used to bring in additional air from the engine compartment or can be closed with an included plug.

Dyno-Tuned Intake Tube:

This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its red XLPE material is heat soaked resistant and extremely durable. It features a Takeda design inspired by import vehicles.

Hassle-Free Installation:

Stainless-steel clamps and reinforced silicone couplings are included for strength and durability. Momentum intakes are designed with fewer parts for a fast and easy installation. Included billet aluminum fittings allow stock connections to transfer over seamlessly.

Optional Turbo Inlet:

To maximize the amount of air going to the this Air Intake System, Takeda Turbo Inlet 59-20002 is available. This Turbo Inlet will remove the air flow restriction of the factory turbo inlet, providing a smooth transition for the air from the Takeda Air Intake tube to the turbo.

EMISSIONS DISCLAIMER

This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Product Details

• Dyno-Proven Gains up to +13 HP and +12 Lbs. x Ft. TQ
• Outflows Factory Intake by 28%
• Measured Flow: 255 CFM @ 7 H2O
• Red Sealed Housing Captures Cool Air Directly Behind Front Grille
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Red Oversized Tube with Import-Inspired Design
• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (Roughly 20 Minutes)
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience

• Air flow chart
• Installation instructions
• Dyno chart

Fitment

aFe’s Warranty

For information on aFe’s warranty terms and conditions, please click here.

Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.

Momentums unique filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2 tall 360-degree radial flow air filter features a 4 flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This RED polyethylene media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistance red cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy and fast installation. A large, clear sight window allows for a hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet can be used to bring in additional air from the engine compartment or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its red XLPE material is heat soaked resistant and extremely durable. It features a Takeda design inspired by import vehicles. Stainless-steel clamps and reinforced silicone couplings are included for strength and durability. Momentum intakes are designed with fewer parts for a fast and easy installation. Included billet aluminum fittings allow stock connections to transfer over seamlessly.
Installation Instructions

This Part Fits: